home *** CD-ROM | disk | FTP | other *** search
- Installation
-
- Start "Install" from Workbench or CLI/Shell and follow the instructions.
-
- After installation, add the following lines to S:User-Startup
- Assign MusicBox: <dir>
- Assign AudioCD: <dir>/AudioCD
- SetENV CDROM_DEVICE=<device name>
- SetENV CDROM_UNIT=<unit number>
-
- where <dir> is the directory you have installed MusicBox in.
- <device name> is the name of your SCSI device (e.g. "scsi.device") and
- unit number is the SCSI ID of your CD-ROM drive.
-
- If you do not add the SetENV lines, you can specify the ToolTypes DEVICE=
- and UNIT= for MusicBox.
-
- If you do not know your SCSI settings, read Inquiry.txt!
-
- IMPORTANT NOTE:
- If you set CDROM_DEVICE and CDROM_UNIT, the ToolTypes will be ignored!
-